ZHC5002 is a smart Z-Wave switching module for GIRA low-voltage push buttons. The module is designed to interface with GIRA Tastsensor 2, type 2003 100, to a Z-Wave network. The ZHC5002 module has a built-in relay to control a locally connected load, thus converting the GIRA module into a wall switch. ZHC5002 can function as a Scene Controller by transmitting different scene notifications when the buttons are pressed, held down, or double-pressed, respectively. The module can operate in various modes and with different functionalities, which can be configured using configuration parameters. The 6 LEDs of the GIRA module can be used for status indication or controlled individually via Z-Wave commands. The ZHC5002 insert is designed to fit into standard EURO wall boxes (60mm). ZHC5002 is equipped with spring terminals to facilitate installation.