ZIF5028 is a Z-Wave based device with 6 relay outputs and 6 digital inputs designed for mounting on a standard M36 DIN rail (EN50022). The 6 relay outputs can be freely controlled over the Z-Wave network and used for various purposes. The 6 digital inputs can be connected, for example, to potential-free contacts or open-collector outputs, allowing them to control other Z-Wave devices by sending commands over the Z-Wave network. ZIF5028 can be used to switch 6 pieces of 230V AC loads that can be freely controlled from the Z-Wave network. Connect up to 6 sensors, such as motion sensors, window or door contacts, and read them via an app or our MATRIX control switch. The 6 relay outputs can be used to control the house's lighting, socket groups, and motors, such as a garage door. All 6 relay outputs are galvanically isolated from each other. The 6 inputs of the ZIF5028 module allow activation of predefined scenes (Central Scene) in a Z-Wave Controller unit. ZIF5028 should be powered with 10-24V DC or 8-24V AC. Activation of Z-Wave inclusion and exclusion is done by activating a switch through a hole in the front of the module. ZIF5028 has a LED indicator on the front for status indication.